We live in a throw-away society, it's a simple fact. You buy that brand new fancy digital camera with all the bells and whistles for $400, and in 6 months to 1 year it's worth maybe half that, and then the unthinkable happens: you drop it and it breaks. The LCD is cracked, or the lens is jammed; what do you do? You head back to the store with your poor little camera and the guy behind the counter (that knows nothing about cameras except for what's written on the box, and even less about camera repair) tells you it's not worth it to fix it and you should toss it in the trash. You feel ripped off and mad at the camera manufacturer and you toss it out and buy a new one made by somebody else.

There are alternatives, there are ALWAYS alternatives to every problem. Honest! Yes, it may cost 0 to fix your camera, and yes you can buy that camera in the bubble pack on the shelf at Wall Mart for less than 0, but what kind of quality do you honestly expect from a 0 camera? You shouldn't expect high quality that's for sure, because you won't be getting it.

#1 – Cracked, broken, smashed LCD screen.

I found it difficult to decide between broken lens repair and cracked LCD screen repair for #1, but I choose the LCD because it can be broken so easily that you can do it without even touching the camera!

The LCD (Liquid Crystal Display) is the view screen on the back of the camera that lets you see menus, playback pictures etc. An LCD screen is a very thin and fragile part of the camera and on many of them it is completely unprotected! Take a look at your LCD screen; is it slightly recessed or does it look like it's flat and even all the way across? If it's flat you have a protective 'window' or 'glass' over the LCD to help prevent damage and breakage. It there is no protective window over the LCD screen then you should invest in a good LCD screen protector made from acrylic plastic and not the silly, useless 'Saran Wrap' protectors you always see as they are a waste of money.

- Don't expose your camera to high heat or extreme cold in your car. Extreme heat can cause expansion of the liquid in the LCD and cause it to 'crack', and on the other side of things extreme cold can cause it to freeze!

- Don't ever put anything pressing against your LCD screen in your camera bag, as it can crack the LCD screen (yes even if there is a window over it there is a chance it will break!)

- Don't put your camera in your back pocket and then sit down!

- Don't store your camera in your pants pocket, it can easily break from the pressure.

- … Just avoid putting the camera in your pants pocket completely. =)

Ok, so it's broken, what do you do now?

- Manufacturers usually cite impact damage as the cause of the breakage and will not repair the camera under warranty. You can try, and I wish you luck, but they probably won't fix it.

- Search for defective cameras on eBay and use one to repair yours and make one good camera out of them.

- Look for an actual camera repair business and not somebody that will send it to the manufacturer and tell you it's $200 and 4-6 weeks to repair. (If they tell you this, they are NOT repairing your camera for you, they are sending it to the manufacturer, guaranteed)

Many LCD screens are very easy to install and you can do it yourself and all you need is a small screwdriver. Some LCD screens are so difficult to replace that even trained technicians don't like doing the repair! I can't tell you Brand …. is the best and Brand … is the worst, it's really not like that. There are certain series of cameras that have one or two models that are more difficult to repair but the others are more straight forward. You will have to figure out if you want to try opening your camera and repairing it by yourself or not.

How is the LCD screen replaced?

With most Canon digital camera LCD screens for example (using them as the example because they have the largest market share) all you do is disconnect the ribbon cable for the LCD and the backlight (the light that shines through the LCD and allows you to see what is on the screen) and then install the new LCD. Some LCDs do come with the backlight that shines through it attached and others do not. Some backlights need to be soldered to the mainboard of the camera, some do not.

- Be careful to not touch the flash capacitor contacts! You WILL zap yourself if you do, and it will HURT a bit. You may end up tossing the camera half-way across the room when it happens to you. (Yes I have done it, I have been repairing digi cams for about 5yrs so….) We have 'flash capacitor dischargers' and use them every time we open a camera.

My wish is that I have helped you to understand the subject of camera repair. You do not have to throw your camera away because the LCD is broken, and you can even fix it yourself!